Do you use a living room that could make use of a ceiling fan to cool it down Installing a ceiling fan yourself is relatively easy, if you are simply replacing a light fixture that is already in the proper location. Considering that a ceiling fan needs the same wiring as your light fixture, the only major thing that needs to be done is to transfer the workbox that can take on the weight of the ceiling fan. Hanging your new ceiling fan on an established box that won't support the additional weight of the fan could end up in disaster. Right before you perform anything, read the guidelines for your fan very carefully and make certain you have the needed tools.

Should you decide to have the fan on a cathedral ceiling, you will have to acquire an extension to ensure the fan wont be so high up. Now that you are ready for the real installation, be sure that the breaker is switched off, so no power is going to the light you are changing. After removing the current light fixture, verify to see if the installed workbox can tackle the weight of your ceiling fan. Normally they aren't designed for a ceiling fan, so you will want to include additional support. This could be done rather quickly if you have access to the attic, and are able to get to the location of the new fan.

To be able to extra support, you nail a 2x4 in the ceiling rafters where it hits the top of the workbox. Be sure that the 2x4 is secured and then bolt on the box to the wood. If you accomplish it the right way, the fan should be well supported by the 2x4. If you are unable to do it from the attic space or you have no attic, you will have to create a cross bracing in your ceiling. It is more hard to perform and may not be that protected but its the greatest option if you have no attic access.

When you have placed the fan together in line with the instructions, you are ready to deploy the fan to your light fixture. The hard part is holding the fan, while setting up the wiring. Based on the fan, most come with a holding frame, and others contain a bracket with a J hook that lets you hang the motor housing. good woodworking ideas Many fans have a chain to operate the speed of the fan and the wall switch turns the unit on or off. If you prefer a light kit along with your fan, they can be controlled by either chain or wall switch.

The next thing is to go by the wiring details which are as basic as hooking up two white wires, two black wires and two ground wires. Once you have accomplished putting together the fan and wiring, the last step is to secure the fan blades. After you connect the blades, the only thing left is to change the breaker back on to notice if you did it right.