Do you own a room that could make use of a ceiling fan to cool it down Setting up a ceiling fan yourself is relatively easy, if you are basically replacing a light fixture that is already in the appropriate location. Most of the wiring you need is already there so the only thing is to replace the present workbox with one that is developed for the weight of a ceiling fan. If you dont adjust the current workbox to something that can cope with the weight could spell disaster. Before you start your project, read the instructions for the fan you have bought, and make sure that you have all of the essential tools.

Should you decide to get the fan over a cathedral ceiling, you will need to purchase an extension so the fan wont be so high up. When you have every little thing prepared, the foremost thing you must do is make sure that the breaker is turned off so no power goes to the light fixture. After taking off the current light fixture, check to see if the installed workbox can handle the weight of your ceiling fan. Normally they aren't designed for a ceiling fan, so you will have to add more support. You could do this fairly easily if you are able to get the light fixture from the attic.

To be able to extra support, you nail a 2x4 inside the ceiling rafters where it touches the top of the workbox. woodworking plans Once the 2x4 is nicely anchored, prop the workbox to the 2x4. If everything is performed the right way, the extra weight of the fan will now be absolutely supported by the wood and the screws. In cases where you are not able to do it from the attic room or you have no attic, you will have to add a cross bracing in your ceiling. It is more difficult to carry out and may not be that protected but its the greatest option if you have no attic admission.

Once you have assembled the fan properly, you are now ready to hang your fan. The difficult part is linking the wiring while retaining the fan. Relying on the fan, some come with a holding frame, and others include a bracket with a J hook that lets you dangle the motor housing. For many fans the wall switch will turn it on or off, and the chain will handle the speeds. If you choose to also install a light kit with the fan, both can be operated by either chain or wall switch.

Electrical wiring the fan is as simple as connecting two black wires, two ground wires and two white wires. Now all you need to do is finish assembling the fan according to the directions, by attaching the fan blades. Immediately after you attach the blades, the only thing left is to turn the breaker back on to notice if you did it right.